SEC-06 • High-Hazard Entry & Atmosphere • 29 CFR 1926.1201–1213 (Subpart AA) & 29 CFR 1910.146
Permit-Required Confined Space Entry (Construction & General Industry)
Identification of confined spaces vs. permit-required confined spaces (PRCS), written Entry Permits, roles of Entrant / Attendant / Entry Supervisor, 4-gas atmospheric testing order (O2, LEL, CO, H2S), forced mechanical ventilation, and non-entry retrieval systems.
Mandatory OSHA & RAVS® Audit Elements Covered
Every Permit-Required Confined Space Entry (Construction & General Industry) document generated by Trade Safety Manuals is pre-merged with your Company Name and Designated Safety Director and addresses these required regulatory provisions:
- Pre-entry and continuous 4-gas atmospheric monitoring in strict order: 1. Oxygen (19.5%–23.5%), 2. Flammable Gases (<10% LEL), 3. Carbon Monoxide (<25–35 ppm), 4. Hydrogen Sulfide (<10 ppm)
- Signed Entry Permit posted at the portal detailing hazards, LOTO/blinding isolation, ventilation, communication, and duration
- Dedicated Attendant stationed outside the portal at all times with zero conflicting duties and direct communication with Entrants
- Tripod, winch, and full-body harness non-entry rescue system rigged and attached prior to entry
Required PPE & Instant Custom Sample Download
Mandatory Personal Protective Equipment (PPE) & Controls Specified:
- Calibrated 4-Gas Direct-Reading Monitor
- Full-Body Retrieval Harness + Tripod/Winch
- Forced-Air Blower Ventilation
- Intrinsically Safe Lighting
Customize & Download Free Sample (.DOC)
Enter your company details below to download an editable Microsoft Word copy of SEC-06: Permit-Required Confined Space Entry (Construction & General Industry) immediately:
Browse All 24 Written OSHA & RAVS® Safety Programs:
SEC-01: Injury & Illness Prevention Program (IIPP) / Corporate Safety PolicySEC-02: Fall Protection, Guardrails & Post-Fall Rescue PlanSEC-03: Control of Hazardous Energy — Lockout / Tagout (LOTO)SEC-04: Electrical Safety, Arc Flash & NFPA 70E Compliance ProgramSEC-05: Trenching, Excavation & Underground Utility ProtectionSEC-06: Permit-Required Confined Space Entry (Construction & General Industry)SEC-07: Respirable Crystalline Silica Written Exposure Control PlanSEC-08: Hazard Communication (HazCom) & GHS Safety Data Sheets ProgramSEC-09: Fire Prevention, Welding, Cutting & Hot Work Permit ProgramSEC-10: Portable Ladders, Stairways & Safe Access ProgramSEC-11: Supported & Mobile Scaffolding Safety ProgramSEC-12: Mobile Elevating Work Platforms (MEWPs) — Aerial & Scissor LiftsSEC-13: Cranes, Derricks, Rigging & Qualified Signal Person ProgramSEC-14: Personal Protective Equipment (PPE) & Hazard Assessment ProgramSEC-15: Heat Illness Prevention, Acclimatization & Hydration PlanSEC-16: Hand & Portable Power Tools, Guards & Pneumatic/Powder-Actuated ToolsSEC-17: Respiratory Protection, Medical Evaluation & Fit Testing ProgramSEC-18: Heavy Earthmoving & Mobile Equipment, Spotters & Traffic ControlSEC-19: Compressed Gas Cylinders, Refrigerants & Mechanical Piping SafetySEC-20: Bloodborne Pathogens, First Aid & Sewage/Biohazard Exposure ControlSEC-21: Emergency Action Plan (EAP), Medical Evacuation & Severe WeatherSEC-22: Incident Investigation, Root Cause Analysis & OSHA 300 RecordkeepingSEC-23: Subcontractor Safety Prequalification & Multi-Employer CoordinationSEC-24: Occupational Noise Exposure & Hearing Conservation Program