SEC-14 • Core Management & Leadership • 29 CFR 1926.95–106 (Subpart E) & 29 CFR 1910.132–138 (Subpart I)
Personal Protective Equipment (PPE) & Hazard Assessment Program
Written Workplace PPE Hazard Assessment Certification, employer-provided PPE at no cost, mandatory head (ANSI Z89.1), eye/face (ANSI Z87.1+), hand, high-visibility, and foot (ASTM F2413) protection, and female/all-worker proper fit requirements (29 CFR 1926.95(c)).
Mandatory OSHA & RAVS® Audit Elements Covered
Every Personal Protective Equipment (PPE) & Hazard Assessment Program document generated by Trade Safety Manuals is pre-merged with your Company Name and Designated Safety Director and addresses these required regulatory provisions:
- Perform and certify in writing a Workplace PPE Hazard Assessment for each trade task and provide required PPE at no cost to employees
- Ensure all PPE properly fits each affected employee (explicitly complying with the updated 29 CFR 1926.95(c) proper-fit requirement for construction PPE)
- Enforce 100% mandatory baseline jobsite PPE: ANSI Z89.1 Type I/II Hard Hat, ANSI Z87.1+ Impact-Rated Safety Glasses with side shields, High-Visibility Vest/Shirt, Work Gloves suitable for the task, and ASTM F2413 Safety-Toe Boots
- Require face shields over safety glasses during grinding, chipping, cutting, or chemical handling
Required PPE & Instant Custom Sample Download
Mandatory Personal Protective Equipment (PPE) & Controls Specified:
- ANSI Z89.1 Hard Hat
- ANSI Z87.1+ Safety Glasses & Face Shield
- Cut-Resistant (ANSI A4+) / Leather Gloves
- ASTM F2413 Footwear
- Class 2/3 Hi-Vis
Customize & Download Free Sample (.DOC)
Enter your company details below to download an editable Microsoft Word copy of SEC-14: Personal Protective Equipment (PPE) & Hazard Assessment Program immediately:
Browse All 24 Written OSHA & RAVS® Safety Programs:
SEC-01: Injury & Illness Prevention Program (IIPP) / Corporate Safety PolicySEC-02: Fall Protection, Guardrails & Post-Fall Rescue PlanSEC-03: Control of Hazardous Energy — Lockout / Tagout (LOTO)SEC-04: Electrical Safety, Arc Flash & NFPA 70E Compliance ProgramSEC-05: Trenching, Excavation & Underground Utility ProtectionSEC-06: Permit-Required Confined Space Entry (Construction & General Industry)SEC-07: Respirable Crystalline Silica Written Exposure Control PlanSEC-08: Hazard Communication (HazCom) & GHS Safety Data Sheets ProgramSEC-09: Fire Prevention, Welding, Cutting & Hot Work Permit ProgramSEC-10: Portable Ladders, Stairways & Safe Access ProgramSEC-11: Supported & Mobile Scaffolding Safety ProgramSEC-12: Mobile Elevating Work Platforms (MEWPs) — Aerial & Scissor LiftsSEC-13: Cranes, Derricks, Rigging & Qualified Signal Person ProgramSEC-14: Personal Protective Equipment (PPE) & Hazard Assessment ProgramSEC-15: Heat Illness Prevention, Acclimatization & Hydration PlanSEC-16: Hand & Portable Power Tools, Guards & Pneumatic/Powder-Actuated ToolsSEC-17: Respiratory Protection, Medical Evaluation & Fit Testing ProgramSEC-18: Heavy Earthmoving & Mobile Equipment, Spotters & Traffic ControlSEC-19: Compressed Gas Cylinders, Refrigerants & Mechanical Piping SafetySEC-20: Bloodborne Pathogens, First Aid & Sewage/Biohazard Exposure ControlSEC-21: Emergency Action Plan (EAP), Medical Evacuation & Severe WeatherSEC-22: Incident Investigation, Root Cause Analysis & OSHA 300 RecordkeepingSEC-23: Subcontractor Safety Prequalification & Multi-Employer CoordinationSEC-24: Occupational Noise Exposure & Hearing Conservation Program